The Surface Preparation is the essential first stage treatment of a steel substrate before the application of any coating, and it is generally accepted as being the most important factor generating the total success of the corrosion protection system.
The performance of a coating is significantly influenced by its ability to adhere properly to the substrate material. The residual millscale on steel surfaces is an unsatisfactory base to apply nowadays, it is replaced by high performance protective coatings and it is therefore removed by abrasive blast cleaning. Other surface contaminants on the rolled steel surface, such as oil and grease, are also undesirable and they must be removed before the blast cleaning process.
The Surface Preparation process not only cleans the steel, but it also introduces a suitable profile so that it can receive the protective coating.
Nova Power International Anticorrosion provides a variety of Blast cleaning and preparation services, which are effective for removing defective coatings, and also surface contaminants or malfunctions. We can perform a variety of high-pressure water cleaning procedures, that reduce the dust associated with conventional abrasive blasting and offer an environmentally friendly option thus reducing the cost associated with hazardous waste disposal:
High pressure water cleaning
Ultra High Pressure water cleaning
Hand- Power Tool Cleaning
Removal Paint Sistem-Induction
Abrasive Blast Cleaning
Removal of soluble iron corrosion products
Surface condition immediately before coating
Additional surface treatments
Solvent Cleaning SSPC-SP1, Hand Tool Cleaning SSPC-SP2, Power Tool Cleaning SSPC-SP3, White Metal Blasting SSPC-SP5, Commercial Blast SSPC-SP6, Brush Off Blast SSPC-SP7, Brush Off Blast SSPC-SP10, Power Tool Cleaning to Bare Metal SSPC-SP11,ST1,2,3m, ISO Standards,etc.